工作原理：3.2米电子水尺系统利用水的微弱导电性原理，使用的处理器芯片做为控制器，通过测量电获取水位数据，经CPU数字编码、分度、采样、数字化处理后进行传输，然后采用有线或无线的通讯技术，将水位数据发送至监控中心或软件，发挥水位实时监测和预警的作用。
安装孔直径：10mm
Equipment composition: host, water gauge section, collector, power supply system, upright pole
Working principle: Utilizing the principle of weak conductivity of water, advanced processor chips are used as controllers to obtain water level data through measuring electrodes. After digital encoding, indexing, sampling, ａnd processing by the CPU, the data is transmitted. Then, wired or wireless communication technology is used to send the water level data to the monitoring center or software, playing a role in real-time water level monitoring ａnd warning.
Power supply method: solar power supply, 30W, 20AH
Transmission method: 2G wireless transmission, optional with 4G
Installation method: wall mounted
Equipment accuracy 1cm (full range equivalent accuracy)
Resolution: 1cm
Unit section specification: 80cm
Measurement length: 80cm * 4
Communication interface: standard RS485, optional 4G, 4-20ma, 0-5v, 0-10v
Parameter configuration: Configure specific parameters for tool configuration
Working modes: altitude mode, measurement depth mode, measurement tilt mode
Maximum power consumption: The maximum power consumption of the host is 1W, ａnd the maximum power consumption of the water gauge section is 0.05W
Control card off: RS485 is equipped with one relay output by default, which can be associated with alarm output or used for upper ａnd lower water level control.
Installation punching size: 86.2mm
Installation hole diameter: 10mm
